Vacation - Carrier Infinity Control Homeowner's Manual

Vacation Settings
You c an pre-select temperature, humidity and fan settings for y our
VACATION function. These settings win t ake e ffect when you a cti-
vate V ACATION operation as outlined inthe NORMAL
OPERATION
section of this manual, pages 7-15.
1 Flip down the door near the base of the Infinity
TM
Control.
2 Press the ADVANCED setup button.
3 Press the RIGHT button four times to select the VACATION
screen (5 of 5)..
4 Use the TEMP (+\-) button to select the highest temperature the
system will allow during VACATION operation.
5 Press down on the SCROLL button to select MIN TEMPERA-
TURE.
6 Use the TEMP (+\-) button to select the lowest temperature the
system will allow during VACATION operation.
7 Press down on the SCROLL button to select MAX HUMIDITY.
8 Use the TEMP (+\-) button to select the highest humidity the
system will allow during VACATION operation.
9 Press down on the SCROLL button to select MIN HUMIDITY.
10 Use the TEMP (+\-) button to select the lowest humidity the
system will allow during VACATION operation.
11 Press down on the SCROLL button to select FAN.
12 Use the TEMP (+\-) button to select AUTO, LOW, MED or HIGH
fan operation.
13 To exit, press ADVANCED or simply close the door.
NOTE You can exit at any time. When exiting, you will be
prompted to save changes if you have made any Select "YES'
to save your changes, "NO" to revert back to previous settings.