Weekday Schedule - Carrier Infinity Control Homeowner's Manual

Weekdays Schedule
You can program one schedule for Monday through Friday using the
WEEKDAYS screen.
1 Flip down the door at the bottom of the control,
2 Press the SCHEDULE button to access the schedule screen.
3 If the word 'M/EEKDAYS" appears at the top of the screen, you are
ready to start If not, press either the LEFT or RIGHT button as
necessary until "WEEKDAYS" is displayed. The WAKE time period
will be highlighted,
4 Using the TIME (+\-) button, set the start time for this time period.
5 Press the red HEAT button. Heating temperature will begin flash-
ing.
6 Set the heating temperature using the TEMP (+\-) button.
7 Press the blue COOL button. Cooling temperature will begin
flashing,
8 Set the cooling temperature using the TEMP (+\-) button,
9 Use the SCROLL button to highlight the next period, then repeat
steps 5 - 9 to select settings for DAY, EVENING and SLEER
10 Exit by pressing the SCHEDULE button or closing the door
- OR -
11 Begin entering your WEEKEND schedule by pressing the RIGHT
button and following the Weekend Schedule instructions (the
next section in this manual),