Canon PowerShot A520 User Manual page 123

The following messages may appear on the LCD monitor.
® For messages which may appear when a printer is connected, refer to the Direct Print User Guide.
The camera is recording image data to the memory card.
Busy,,, The playback mode is running.
No memory card You turned on the power without a memory card installed.
You attempted to shoot with no memory card installed, or attempted to attach a sound
Cannot record !
memo to a movie.
Memory card error Memory card has experienced an anomaly.
Memory card full Memory card is too full to accommodate more images or print settings.
Card locked ! The SD card (sold separately) is write-protected.
The image could not be created because there is an image with the same name as the
directory that the camera is attempting to create, or the highest possible file number has
Naming error ! already been reached, in the [Set up] menu, pBease set [FiBe No. Reset] to [On]. After
you save aH the images you wish to retain onto a computer, format the memory card
(p. 19). Please note that formatting will erase all the existing images and other data.
Battery charge is insufficient to operate the camera. Replace both batteries at the same
Change the batteries time with new AA-size alkaline batteries (p. 15) or fully recharged Canon NiMH
batteries.
No image No images recorded on memory card.
You attempted to play back an image larger than 4064 x 3048 pixels or with a large data
image too Barge size.
Incompatible JPEG
You attempted to play back an incompatible JPEG image,
format
Corrupted data You attempted to play back an image with corrupted data.
_j
o
Z
(D
q_
!2!