Roll Over Phone Lines; Two Line Phone System - Brother IntelliFAX 1350M Owner's Manual

SETUP& PREPARATION BEFORE USE
5. Connect the power cord.
When you connect the power, the display will show "01/01/1996 00:00".
2. Since the machine is grounded through the power outlet, you _,m i,__t_,__'L., ,,L, _('ll
from potentially hazardous electrical conditions on the telephone network by
keeping the power to your fax machine on when you connect it to a telephone line.
3. Lightning and Power Surges can damage this product! We recommend that you
use a quality Surge Protection Device on the AC power line as well as the
telephone line or unplug the lines during a lightning storm.
6. Connect the telephone line.
5o
Wire extention
/i
Telephone line cord
Handset curled cord
FOR YOUR INFORMATION
Roll Over Phone Lines
A roll over phone system is a group of two or more separate telephone lines that pass
incoming calls to each other if they are busy. The calls are usually passed down or
"rolled over" to the next available phone line in a preset order.
Your fax machine can work in a roll over system as long as it is the last
number in the sequence so the call can not roll away. Do not put the fax machine
on any of the other numbers. When the other lines are busy and a second fax call is
received, the fax call is transferred to a line that does not have a fax machine.
Two Line Phone System
A two line phone system is nothing more than two separate phone numbers on the same
wall outlet. The two phone numbers can be on separate jacks (RJll) or combined into
one jack (RJ14). Your fax machine must be plugged into an RJll jack. RJll and RJ14
jacks may be equal in size and appearance and both may contain 4 wires (black, red,
green, yellow). To test the type ofjack, plug in a two line phone and see if it can access
both lines. If it can, you must separate the lines for your fax machine.
. . II
1-9