Bosch SHE99C05 Use And Care Manual page 18

Table of Contents

Advertisement

Care and Maintenance (continue€
4. Look for obstruction
in the spray nozzles.
5. If the spray nozzles
need cleaning,
flush
them under running
water.
To reinstall
the top spray
arm:
1. Return the top spray arm to its installed
position.
2. Return the locking nut to its installed
position
and turn it 1/8 turn clockwise.
3. Return the top rack to the top rack roller
guides.
To remove
the bottom
spray
arm:
1. Remove
the empty bottom
rack from the
dishwasher
tub.
2. Grasp
and lift the bottom
spray arm
as
shown
in Figure 29.
Figure 29
Check/Clean
the
Filter
System
This dishwasher
has a filter system
that consists
of a Large Object Trap/Cylinder
Filter assembly
and a Fine Filter. Select models have an
additional
Micro Filter. The filter system
is located
on the inside of your dishwasher
under the lower
rack and is easily accessible.
During
normal
use, the filter system
is
self-cleaning.
You should
occasionally
inspect
it
for foreign
objects
and clean it when necessary.
To Remove
the Large Object
Trap/Cylinder
Filter Assembly:
1. Remove
the bottom
rack.
2. Grasp the assembly
as shown in Figure 30
and turn it counterclockwise
1/4 turn.
Figure 30
3. Look for obstruction
in the spray nozzles.
4. If the spray nozzles
need cleaning,
flush
them under running
water.
To reinstall
the bottom
spray
arm:
1. Return the bottom
spray arm to its installed
position
and press it so that it snaps into
place.
2. Return the bottom
rack to its installed
position.
Check/Clean
the Stainless
Steel Inner
Door and Tub
Clean the outer edges of the inside door panel
regularly
to remove
debris that might collect
from
normal
loading.
If spots begin to appear on the stainless
steel
tub or inner door, make sure the rinse aid
reservoir
is full.
3. Lift out the assembly
as shown
in Figure 31.
Figure 31
Large
Object
Frap/
Cylinder
Filter
To avoid
injury, do not reach
into the large
object
trap with
your
fingers.
The large
object
trap could
contain
sharp
objects.
4. Carefully
examine
the assembly.
If you find
debris in the Large Object Trap, turn it
upside-down
and gently tap it on a surface
such as a countertop
to dislodge
and
remove the debris.
Flush the Cylinder
Filter
clean by holding
it under running
water.
17

Advertisement

Table of Contents
loading

Table of Contents