Table of Contents
Advertisement
Operating the Dishwasher (continue€
1. Open the dishwasher
door far enough to
expose the control panel.
2. Press the ON/OFF
button.
3. Press the MENU/OK
button four times to
obtain the current
drying program.
You must
press the button five times if you are out of
rinse aid.
4. Press the + or - buttons to step through
the
following
options:
• Economy
Drying - saves
energy.
• Normal
Drying - factory
default setting.
• Extra Drying - improves
the drying
performance.
5. After selecting
the desired
drying option, you
must press the MENU/OK
button to save the
setting. The display will show "Value Stored"
and return to the main menu. If you did not
select a different
drying option, press the
START button to return to the main menu.
6. Select the desired
wash cycle by pressing
the - or + buttons.
7. Press START
and close the dishwasher
door to begin the cycle.
End Signal
The dishwasher
emits a tone (five times) to let
you know that your dishes are clean and dry. You
can change
the tone volume
or you can disable
it.
NOTE:
In the Options
Step Down Menu you can
return to the main menu at any time by pressing
the START button.
1. Open the dishwasher
door far enough to
expose the control panel.
2. Press the ON/OFF
button.
3. Press the MENU/OK
button five times to
display the current
End Signal setting.
You
must press the button six times if you are
out of rinse aid.
4. Press the + or - buttons
to obtain the desired
volume.
End Signal 6 - loudest setting
(factory
default setting)
End Signal 0 - End Signal disabled
5. After selecting
the desired
volume,
you must
press the MENU/OK
button to save the
setting. The display will show "Value Stored"
and return to the main menu. If you did not
change
the volume,
press the START button
to return to the main menu.
6. Select the desired
wash cycle by pressing
the - or + buttons.
7. Press START
and close the dishwasher
door to begin the cycle.
Rinse
Aid ON/OFF
This option allows you to turn the rinse aid
dispenser
on or off.
NOTE:
In the Options
Step Down Menu you can
return to the main menu at any time by pressing
the START
button.
1. Open the dishwasher
door far enough to
expose the control panel.
2. Press the ON/OFF
button.
3. Press the MENU/OK
button six times to
display the current
rinse aid setting.
You
must press the button seven times if you are
out of rinse aid.
,
5.
Press the + button to turn the rinse aid
dispenser
on or off.
After selecting
the desired
setting, you must
press the MENU/OK
button to save the
setting.
The display will show "Value Stored"
and return to the main menu. If you did not
change
the rinse aid amount,
press the
START button to return to the main menu.
6. Select the desired
wash cycle by pressing
the - or + buttons.
7. Press the START button and close the
dishwasher
door to begin the cycle.
NOTE:
When the rinse aid setting
is turned
off,
the display
message
"Refill Rinse Aid" will not
appear.
See the Adding
Detergent
and Rinse Aid
section
for further
information.
Display
Language
Selection
This option allows you to select the display
language.
The first time that you use your
dishwasher
this screen
will automatically
appear.
NOTE:
In the Options
Step Down Menu you can
return to the main menu at any time by pressing
the START
button.
1. Open the dishwasher
door far enough to
expose the control panel.
2. Press the ON/OFF
button.
11
Advertisement
Table of Contents
