Table of Contents
Advertisement
Operating the Dishwasher (continue€
3. Press the MENU/OK
button seven times to
display the current
language
setting.
You
must press the button eight times if you are
out of rinse aid.
4. The available
language
choices
are:
AE = American
English
CF = Canadian
French
,
6.
MS = Mexican
Spanish
Press the + or - buttons
until the desired
language
flashes.
After changing
the language
selection,
you
must press the MENU/OK
button to save the
setting.
The display will show "Value Stored"
and return to the main menu. If you did not
change
the language,
press the START
button to return to the main menu.
7. Select the desired
wash cycle by pressing
the - or + buttons.
8. Press START and close the dishwasher
door to begin the cycle.
Standard
Programs
The wash cycles available
in this hidden
menu
are special wash cycles that may be used to
solve special needs in the field.
NOTE:
In the Options
Step Down Menu you can
return to the main menu at any time by pressing
the START button.
1. Open the dishwasher
door far enough to
expose the control panel.
2. Press the ON/OFF
button.
3. Press the MENU/OK
button eight times to
display the screen "STANDARD
PROGRAMS".
You must press
the button
nine times if you are out of rinse aid.
4. After the "STANDARD
PROGRAMS"
screen
is displayed,
press the + button one time to
display
available
wash cycles.
Those cycles
are:
Regular
- normal wash cycle.
Enviro Care - reduces
water and energy
consumption.
Glass Care - reduces
temperatures
to
reduce
glass damage.
Extreme
Wash - for extremely
hard to
remove
food soils.
5. Press the + or - buttons
until the desired
wash cycle
is displayed.
6. When the desired
setting
is displayed,
press
the START button and close the door to
begin the cycle.
Starting
the Dishwasher
When the correct
cycle and options are shown
in
the display window
and you have added detergent
and rinse aid as explained
in the Adding
Detergent
and Rinse
Aid section
of this manual,
press the START button and close the door.
After pressing
the START button, the display will
show the following
information:
" "Close the door".
"
Estimated
completion
time (this estimated
time automatically
adjusts throughout
the
cycle based
on incoming
water temperature
and selected
options).
"
Current
cycle name.
• "Return"
(allows you to choose
another
cycle).
Close the dishwasher
door. The dishwasher
will
begin and run until the cycle is complete.
When the cycle ends, the dishwasher
will emit an
end of cycle tone (five times). Open the
dishwasher
door. The display will briefly show
"Clean".
After 5 seconds
the dishwasher
will
automatically
turn off.
NOTE:
To accelerate
and enhance
drying, open
the dishwasher
door, pull the top rack a few
inches out of the dishwasher,
and prop the
dishwasher
door against the top rack.
Interrupting
a cycle
You could be seriously
scalded
if you open
the dishwasher
door
quickly
during a wash
or rinse cycle. Do not fully
open the
I dishwasher
door for at least
10 seconds
or
until
water
noises
stop.
Open the dishwasher
door far enough to expose
the control panel. The display will show:
o "Close the door".
the remaining
cycle time.
the selected
cycle.
*
the cycle phase.
"Cancel
Program".
12
Advertisement
Table of Contents
