Control (Panel) - Bosch HGS5022UC-01 Use And Care Manual

Getting Started
Indicators and Other Features
Convection Fan
Control (Panel)
Beep - Signals that more information must be entered or confirms the receipt of
an entry. A Beep also signals the end of a program or an oven error.
End-of-Cycle Indicator - To indicate when a mode is finished, 3 consecutive
beeps will sound.
Default Settings - The cooking modes automatically select the default tempera-
ture. These can be changed when a different one is needed.
Flashing Symbol or Number - Signals an incomplete setting and calls for
another step or START to be pressed.
F Number Codes -These codes display when there is a problem with the range.
The convection fan operates during any convection mode. When the oven is oper-
ating in the convection mode, the fan will turn off automatically when the door is
opened. The convection fan does run during self-clean, although not at the begin-
ning of the mode.
Note: On some models, the convection fan also runs during preheat for the bake
mode.
Oven Control Panel
Light
Time
Off
Clock Oven Temperature
l N 350°0
I HR:MIN:SEC _ PM
F
T,MER / D_ --
'°° L BROil /
l luu .
/ z/ /
Cooking Lock indicator
Preheat Temperature Mode indicator
Control Knob
CookingMode
Temperature O)
Start
Figure 5: Oven Control Panel
English 8