Asus RS162-E4 RX4 User Manual page 35

2. Using a screw driver to secure
the three scews on the battery
moduel cards.
If there is no battery module card on your ZCR card, please skip step 1-2
and start from step 3.
3. Using a screw driver to remove
the two screws that secures the
bracket of the ZCR card.
4. Insert the ZCR card into the slot
on the transfer card.
5. Put the two retaining poles into
the holes on the system board.
The two retaining poles are
provided along with the ZCR
card package.
ASUS RS162-E4/RX4
-1