Table of Contents
Advertisement
By default, the RAID Disk field shows No before array creation. This
field is grayed out under the following conditions:
•
The disk does not meet the minimum requirements for use in a RAID
array.
•
The disk is not large enough to mirror existing data on the primary
drive.
•
The disk has been selected as the Hot Spare for the RAID array.
•
The disk is already part of another array.
4. Repeat step 5 to add the other disks to the volume.
5. When done, press <C> to create the array, then select Save changes
then exit this menu.
6. The utility creates the array.
ASUS RS162-E4/RX4
-
Advertisement
Table of Contents
