Table of Contents
Advertisement
5. Cearfully insert the drive tray
and push it all the way to the
depth of the bay until just a
small fraction of the tray edge
prottrudes.
6. Push the tary level until clicks,
and secures the drive tray in
place. The drive tray is correctly
placed when its front edge aligns
with the bay edge.
7. Refer step 1 to 6 if you wish to
install a second , third and/or
fourth drive.
-1
When installed, the SAS/SATA connector on the drive connects to the
SAS/SATA connector on the backplane. Refer to the section 2.7 SAS/
SATA backplane cabling for more information.
Chapter 2: Hardware setup
Advertisement
Table of Contents
