1. From the main menu, use CH+ , CH- , VOL+ , and VOL- to select PAN TILT ZOOM and press M . The
first camera displays in single camera mode.
2. Press Zoom . The camera zooms into Level 1. Press Zoom again to zoom into Level 2.
(Sample actually goes into QUAD mode, then press Zoom and into camera 1.)
3. Press Ch+ and Ch- to pan the camera from left to right and back or VoL+ and VoL- to tilt
the camera up and down.
4. Press esC to return to the the main menu.
The system will exit Zoom mode after it is idle for 2 minutes.
34