PLC-WM4500/WM4500L Basic Serial Command Functional Specifications
6.51 INPUT 1 SCART Command
Command
"C51" [CR]
Select SCART input in Input 1.
Detail
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
6.52 LENS SHIFT UP Command
Command
"C5D" [CR]
Detail
Move projection area upward.
Acceptable
Response
Unacceptable
6.53 LENS SHIFT DOWN Command
Command
"C5E" [CR]
Detail
Move projection area downward.
Acceptable
Response
Unacceptable
6.54 LENS SHIFT LEFT Command
Command
"C5F" [CR]
Detail
Move projection area leftward.
Acceptable
Response
Unacceptable
6.55 LENS SHIFT RIGHT Command
Command
"C60" [CR]
Detail
Move projection area rightward.
Acceptable
Response
Unacceptable
6.56 AUTO PC ADJ. Command
Command
"C89" [CR]
Execute AUTO PC ADJ. function
Detail
This command works the same way as "AUTO PC" button of the remote control.
Sending this command during Auto PC Adj. process terminates the operation.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
19/26