Bosch SGE63E05UC/28 Instructions For Use Manual page 8

To achieve proper drying, always use a liquid rinse agent, even if your
detergent contains a rinse agent or drying additive.
Rinse Agent Dispenser
Open the rinse agent dispenser by lifting the tab with your thumb.
NOTE: The dishwasher indicates low rinse agent either by showing the
symbol _ in the countdown display, or illuminating the refill rinse agent
4A%
light (model dependent).
Add liquid rinse agent to the dispenser as shown until the rinse agent
reservoir is full. Wipe up any excess rinse agent that puddles when the
dispenser reservoir is full.
Setting amount of rinse-aid
The amount of rinse-aid dispensed can be set from "r:00" to "r:06".
o
o
o
o
o
o
Open the door (for hidden controls only).
Turn unit on by pressing the ON/OFF button.
Hold down button "A" (see page 4) and press START until the display
indicates "H:00"
Press "A" button until the display indicates "r:05".
Release both buttons.
Press "C"to select the desired setting.
, "r:00" means the RinseAgent dispenser
, "r:01" means the Rinse
, "r:02" means the Rinse
, "r:03" means the Rinse
, "r:04" means the Rinse
, "r:05" means the Rinse
, "r:06" means the Rinse
=s off.
Agent dispenser is at the lowest setting.
Agent dispenser is low setting.
Agent dispenser is medium setting.
Agent dispenser is medium high setting.
Agent dispenser is high setting.
Agent dispenser =s at the highest setting
, Save the selected language by pressing the START button.
, Close the door (for hidden controls only).
Switching off rinse-aid refill indicator
, Set the rinse aid option to r:00
NOTE: Do not change the amount of rinse-aid unless there are streaks (select
lower setting) or water stains (select higher setting) visible on the utensils,