Additional Options And Features - Bosch SGE63E05UC/28 Instructions For Use Manual

* modeldependant
Half Load
*
If you have only a few items to wash (e.g. glasses, cups, plates), you can
switch to "half load". This will save water, energy and time. It is recommended
to put a little less detergent in the detergent dispenser than for a full load.
Extra Wash *
Cycle option can be selected to increase wash performance with more water
used in extra sequences and at higher temperatures.
Sanitize option *
All models are designed to sanitize the loaded dishes. You must press
the Sanitize Option button to active the Sanitation features. The technical
Sanitation measures may also improve the drying results
Eco Action *
Lowers temperature and slightly increase cycle length to maintain perfor-
mance while lowering energy usage.
Additional Features
14
EcoSense Wash Management System*
An advanced sensor system determines the soil level in the wash water
and automatically deletes fresh water fills if they're not needed, saving you
time and money, while cutting energy usage.
Sanitized
A dishwasher cycle that has the Sanitized symbol has been tested to meet
very strict requirements of wash time and water temperature to ensure
dishware and kitchenware sanitization.
Time remaining Indicator
When the program is selected, the remaining running time of the program
is indicated on the digital display. The running time is determined during the
program by the water temperature, the number of utensils as well as the
degree of soiling and may vary (depending on the selected program).
InfoLight*
An LED illuminates the floor to indicate unit is running. Do not open the
dishwasher door until the LED is no longer visible on the floor.
If the appliance is installed at eye-level, the LED is not visible.
, Turn unit on by pressing the ON/OFF button.
, Hold down button "A" and press START until the display indicates "H:00".
Release both buttons
, The LED for "A" flashes and display indicates "H:04".
, Press "A" until the display shows "1:01"
, Press "C" to switch between "1:01" and "1:00" and press START to
save.