Bosch Gas Ranges with European Convection Use And Care Manual page 20

Operation - Oven
Automatic Convection Conversion
(models with convection bake)
Hot Oven Indicator
Using the Timer
To set the timer:
9. The display alternates between the cooking mode and preheat.
The preheated temperature is displayed, starting at 100°R The actual tempera-
ture increases until set temperature is reached, at which point the oven will beep.
10. To change temperature during cooking, press Temperature. Turn the knob to
select new temperature and press START.
11. Once cooking has been completed, press OFF to turn off oven.
In the convection bake mode, the temperature is automatically reduced 25 ° F
from the package or recipe temperature. Simply enter the package or recipe tem-
perature when setting the mode and the range calculates the correct temperature.
The Automatic Convection Conversion feature can be turned off to allow for man-
ual temperature adjustment. See "Turn Automatic Convection Conversion ON or
OFF" on page 15 for details.
When the Automatic Convection Conversion feature is activated, the display will
read AUTO CONV BAKE. When the feature is turned off, it will read CONV BAKE.
After the oven has been turned off, HOT appears in the display where the cooking
mode was to indicate that the oven is off but still hot. When the oven temperature
drops below 176 ° F, HOT is no longer seen in the display.
Notes:
• If you do not finish setting the timer, the oven will beep periodically as a
reminder to set the time. Press OFF to exit the TIMER mode. (Selecting OFF
when not setting the timer will turn the oven off.)
• Turn the knob to display the time of day or further information about the oven
mode when the timers are in use.
1. Press TIME and TIMER 1 will flash in display.
Changing the Timer/s
Clearing the Timeds
.
.
4.
5.
6.
.
.
.
4.
5.
6.
1.
Turn clockwise and TIMER 2 will be displayed.
Select TIMER 1 or 2, then press TIME. SET
TIMER 1 (2) appears in display. Minutes flash.
Turn knob to set minutes, tf setting only minutes,
press START. Otherwise, continue to step 4.
Press TIME again and the hours will flash.
Turn knob to set hours.
Press TIME again. The TIMER is now set.
If TIME or START is not pressed, oven will begin beeping and timer display
will begin flashing.
Press TIME. TIMER 1 will appear in display.
Select either TIMER 1 or 2.
Press TIME. RESET TIMER 1 (2) appears in
the display. Minute digits flash.
Turn knob clockwise or counterclockwise to change minutes.
Press TIME again and hour digits will flash.
Turn knob clockwise or counterclockwise to change hours.
Press TIME and new time is set.
Press TIME once. TIMER 1 flashes.
English 18