Connecting Cables; Connecting Lan Cable - Kyocera ECOSYS FS-C2526MFP Operation Manual

Preparation before Use > Connecting Cables

Connecting Cables

Connecting LAN Cable

The equipment can be connected with a network cable and used as a network printer or network scanner.
1
2
3
Power Off.
Check that the indicators are off.
Connect the machine.
1
Connect the LAN cable to the network interface located on left side of the body.
2
Connect the other end of the cable to the hub.
Set up the machine.
Configure the network settings.
For details, refer to Machine Setup Wizard on page 2-22.
2-10