Kyocera ECOSYS FS-C2126MFP Operation Manual page 161

Selecting the Multi Purpose Tray
Change the paper size and media type.
The available paper sizes and media types are shown in the table below.
Category
Paper
Size
Media
Type
*
**
***
NOTE:
You can conveniently select in advance the size and type of paper that will be used often and set them
as default (refer to Paper Size and Media Type Setup for Multi Purpose Tray on page 8-15).
How to
Item
Select
Standard Select from
Sizes the standard
size,
envelope,
postcard or
the custom
sized paper
Size Enter the
Entry size not
included in
the standard
sizes 1 and
2**.
Plain, Transparency, Vellum, Labels, Recycled, Rough,
Preprinted***, Bond, Cardstock, Color, Prepunched***,
Letterhead***, Envelope, Coated, Thick, High Quality,
Custom 1 to 8***
For instructions on how to specify the custom paper size (Custom),
refer to Adding a Custom Size and Media Type for Paper to Print on
page 8-11.
The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-26.
For instructions on how to specify the custom paper types 1 to 8,
refer to Paper Weight on page 8-17.
To print on preprinted or prepunched paper or on letterhead, refer to
Special Paper Action on page 8-23.
7
Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for copying.
8
Press the Start key to start copying.
Sizes
Letter, Legal, Statement,
Executive, Oficio II, A4, A5,
A6, B5, B6, Folio, 16K, ISO
B5, Envelope #10, Envelope
#9, Envelope #6, Envelope
Monarch, Envelope DL,
Envelope C5, Hagaki,
Oufuku Hagaki, Youkei 4,
Youkei 2 and Custom*
Inch models
Horizontal: 5.83 to 14.02" (in
0.01" increments), Vertical: 2.76
to 8.50" (in 0.01" increments)
Metric models
Vertical: 70 to 216 mm (in 1 mm
increments), Horizontal: 148 to
356 mm (in 1 mm increments)
4-5
Copying Functions
4