Yamaha PSR-S550 Owner's Manual page 36

Recording Your Own Performance
3
Recording will start when you play the keyboard.
You can also start recording by pressing the [ > / ■ ] button.
When recording is started, the display automatically returns to the Main
display, and the measure number is shown in the Main display.
4
Stop recording by pressing the [>/■] or [REC] button.
Alternately, if you press one of the ENDING/rit. [I]–[III] buttons while
recording the ACMP track, an appropriate ending pattern will play and
then recording will stop. When recording stops, the current measure
number will return to 001 and the recorded track numbers in the display
will be shown in a box border.
A message prompting you to confirm saving of the data will appear.
5
Save the recorded Song.
Press the [+/YES] button.
■ To Record Other Tracks.
Repeat steps 2 through 4 to record any of the remaining tracks.
You can listen to the previously recorded tracks by pressing the appropriate [1/
9]–[8/16] buttons while recording. Previously recorded track numbers are
shown in a box border.
You can also mute previously recorded tracks (the muted tracks will not appear
in the display) while recording new tracks (page 74).
■ Redo the Recording
Simply select the track you want to re-record for recording in the normal way.
The newly recorded material will overwrite the previous data.
36
PSR-S550 Owner's Manual
Current measure number
Start
recording
or
NOTE
• When Song memory is full, a
corresponding message is
shown in the display and record-
ing will be stopped. In this case,
delete any unnecessary Song
data by using Song clear or
track clear then start recording
again. (See page 37.)