Connecting To A Computer (Usb Terminal); Turning The Power On - Yamaha PSR-S550 Owner's Manual

Owner's manual
Hide thumbs Also See for PSR-S550:
Table of Contents

Advertisement

Connecting to a Computer (USB Terminal)

Connect the instrument's USB terminal to the USB ter-
minal of a computer, and you can transfer performance
data and Song files between the two (page 96). To use
the USB data-transfer features you'll need to do the fol-
lowing:
• First, make sure the POWER switch on the instru-
ment is set to OFF, then use a USB cable to con-
nect the instrument to the computer. After making
the connections, turn the instrument's power on.
• Install the USB MIDI driver on your computer from
CD-ROM (see page 101).
• Install the MusicSoft downloader on your com-
puter from the website (see page 103)

Turning the Power On

Turn down the volume by turning the [MASTER VOL-
UME] control to the left and press the [STANDBY/ON]
switch to turn on the power. Press the [STANDBY/ON]
switch again to turn the power OFF.
Backup data in the flash memory is loaded to the instru-
ment when the power is turned on. If no backup data
exists on flash memory, all instrument settings are
restored to the initial factory defaults when the power is
turned on.
CAUTION
• Even when the switch is in the "STANDBY" position, electricity is
still flowing to the instrument at the minimum level. When you are
not using the instrument for a long time, make sure you unplug the
AC power adaptor from the wall AC outlet.
CAUTION
• Never attempt to turn the power off when a "Writing.." message is
shown in the display. Doing so can damage the flash memory and
result in a loss of data.
Setting Up
11
PSR-S550 Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psr550

Table of Contents