Yamaha PSR-S550 Owner's Manual page 68

Owner's manual
Hide thumbs Also See for PSR-S550:
Table of Contents

Advertisement

Creating Original Styles (Style Creator)
■Part Settings:
Select a Part
1
Press the CATEGORY[
edly until "Part" appears in the display.
2
Rotate the dial and select a recorded Part.
Range: RHYTHM 1–2, BASS, CHORD 1–2,
PAD, PHRASE 1–2
3
Press the [EXECUTE] button to set the Part.
Select a Voice
1
Press the CATEGORY[
edly until "Voice" appears in the display.
2
Press a desired [VOICE CATEGORY] button
to select the Voice category.
3
Rotate the dial to select a Voice.
Range: When RHY 1 is selected as the Part, all
Voices can be selected.
When RHY 2 is selected as the Part,
drum Voices can be selected.
When other Part is selected, all Voices
excepting drums can be selected.
Part Volume
1
Press the CATEGORY[
edly until "Part Volume" appears in the dis-
play.
2
Rotate the dial and set the Part Volume.
Range: 0–127
Pan
1
Press the CATEGORY[
edly until "Pan" appears in the display.
2
Rotate the dial and set the Pan position.
Range: 0–64–127
Reverb Level
1
Press the CATEGORY[
edly until "Reverb Level" appears in the dis-
play.
2
Rotate the dial and set the Reverb depth.
Range: 0–127
Chorus Level
1
Press the CATEGORY[
edly until "Chorus Level" appears in the
display.
2
Rotate the dial and set the Chorus depth.
Range: 0–127
68
PSR-S550 Owner's Manual
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
< >
]/[
] button repeat-
< >
]/[
] button repeat-
< >
]/[
] button repeat-
< >
]/[
] button repeat-
< >
]/[
] button repeat-
< >
]/[
] button repeat-
■Recording a Part
Part buttons indication
Unlit, does not contain data or is
a non-playing Part (mute)
Lit in Green, contains data and selected
as playing Part
Lit in Red, recorded Part
Rhythm Part recording
Confirm that desired section name appears at the
upper right area in the display, and then follow the
instructions below.
1
Simultaneously hold down the [REC] button
and press a [RHY 1] or [RHY 2] button in the
rhythm Part.
"RHYTHM1" or "RHYTHM2" appears in the
display.
2
Press the [EXECUTE] button.
A REC mark appears at the recorded Part on
the display. In this condition, the [PART] but-
ton also changes to red.
Contains data, sounds (Part ON)
Recorded part
Contains data, but is muted (Part OFF)
Play the keyboard to check that the appropriate
drum Voices can be heard. You can mute the
Parts during recording (except for the Part
you're recording), by simply pressing the
[PART] button so that the mute mark is indi-
cated at the Part. In this condition, the [PART]
button also changes from green to unlit.
● ● ● ● ● ● ● ● ● ● ● ● ●
Current measure number
Contains no data

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psr550

Table of Contents