Yamaha PSR-S550 Owner's Manual page 35

2
Press the [EXIT] button, then select the recording part for
each track (Part Assign).
◆ Selecting the part for the Melody track
When Style is OFF: You can select the track for recording from [1]–
[16].
When changing the track function between [TR 1–8] and [TR 9–16],
press the [REGIST/PART [MIXER]] button repeatedly until the desired
item appears at the top on the display.
While holding down the [REC] button, press one of the track buttons
[1/9]–[8/16] until the desired part is shown at the track button. Each
time you press the button, the part is changed in order (e.g., MAIN,
DUAL, LEFT) in the Main display.
When Style is ON: [TR 1–8] can only be selected for the Melody
tracks.
Press and hold
◆ Selecting the part for the Accompaniment track
While holding down the [REC] button, press the [ACMP] button. The
REC indication will be highlighted in the display and operation will be
set to record ready mode.
Press and hold
Track 1 is set to the MAIN part.
ACMP is set to record ready mode.
Recording Your Own Performance
CAUTION
• If you record your perfor-
mance to a track that con-
tains previous data, the
previous data will be overwrit-
ten by the new data.
NOTE
• When ACMP track is set to REC
ON, the accompaniment will be
automatically set to ON.
• ACMP ON/OFF does not
change while recording is in
progress.
• An assigned part cannot be
specified to another track.
• A maximum of three melody
tracks can be recorded simulta-
neously.
NOTE
• If you want to cancel the record
ready mode of a track, simulta-
neously hold down the [REC]
button and press again the track
button you want to cancel.
PSR-S550 Owner's Manual
35