Removing And Installing Ink Cartridges - Epson Stylus Photo RX600 User Manual

Removing and Installing Ink Cartridges

Be sure you have a new ink cartridge before you begin. Once you start replacing a
cartridge, you must complete all the steps in one session.
1. If an ink cartridge is empty:
Look at the LCD screen to see which cartridge is empty, then press the
button.
If an ink cartridge is low:
Press the
Setup
select
Ink Cartridge
2. Use the side grips to open the scanner unit, as shown, making sure to keep the
scanner lid closed on top.
3. Open the ink cartridge cover holder by pulling the back up and toward you.
Caution:
Never attempt to open the cartridge holder's cover while the print head is moving.
Wait until the cartridges have moved to the replacement position.
button to enter setup mode. Press the u and d buttons to
, press , then press
OK
again.
OK
Open the cover
from the back
Replacing Ink Cartridges
OK
125