Pvvk-Sh Horizontal Vent Adaptor Kit - Empire Comfort Systems BP)-1 Installation Instructions And Owner's Manual

PVVK-SH HORIZONTAL VENT ADAPTOR KIT

Available from Empire Comfort Systems, Inc.
INSTALL FOAM GASKET
FLUE ADAPTOR
Attach flue adaptor to back of heater with four (4) screws.
Note: No PVC cement is needed
to install flue adaptor kit.
PLASTIC GASKET
THREADED CONNECTOR
Install plastic gasket and screw threaded connector to the flue adaptor.
When these connections are made, continue with your vent run.
Cement all PVC joints on vent run.
22618-17-0308 Page 23