Printer Maintenance; System Settings - Dell C1765nf Color Laser User Manual

Fax Transmit
Fax Broadcast
Fax Protocol
Country

Printer Maintenance

The Printer Maintenance tab contains the System Settings, Date & Time, Paper Density, Adjust Transfer Roller,
Adjust Fusing Unit, Registration Adjustment, Adjust Altitude, Reset Defaults, Non-Dell Toner, Transfer Roller
Refresh Mode, Web Link Customization, TCP/IP Settings, Tray Settings, EWS, Scan Defaults, Fax Defaults,
Copy Defaults, and Fax Settings pages.

System Settings

Purpose:
To configure the power saving mode, auto clear time, warning tones, time-out time, operator panel language
settings, job log auto print, and mm/inch setting.
Values:
Power Saver Timer Sleep
Deep Sleep
Auto Reset 45 seconds
1 minute
2 minutes
3 minutes
4 minutes
Alert Tone Panel Select
Tone
Panel Alert Tone Off
Job Tone
146
Understanding the Tool Box Menus
Displays whether to print a transmission report after every fax transmission or only
when an error occurs.
Displays whether to print a transmission report after every fax transmission to
multiple destinations or only when an error occurs.
Displays whether to print a protocol monitor report after every fax transmission or
only when an error occurs.
Displays the country where the printer is used.
*1
Available Range:
5– 30 minutes
Available Range:
1–6 minutes
Specifies the time taken by the printer before it automatically resets the settings for
Copy, Scan, or Fax on the operator panel to the defaults when no additional
settings are made.
Off
Low
Medium
High
Low
Medium
High
Off
Low
Medium
High
Specifies the time taken by the printer before it enters Sleep
mode after it finishes a job.
Specifies the time taken by the printer before it enters Deep
Sleep mode after it goes into Sleep mode.
Does not emit a tone when the operator panel input is correct.
Emits a tone at the specified volume when the operator panel
input is correct.
Does not emit a tone when the operator panel input is
incorrect.
Emits a tone at the specified volume when the operator panel
input is incorrect.
Does not emit a tone when a job is complete.
Emits a tone at the specified volume when a job is complete.