Expanding Voices - Yamaha PSR-A2000 Owner's Manual

Expanding Voices

Installing an Expansion Pack lets you add a variety of optional Voices and Styles to
each Expansion category. The installed Voices and Styles can be selected like Preset
Voices and Styles, allowing you to expand your music performance and creation
possibilities.
For information on obtaining Expansion Packs, refer to the PSR-A2000 page at the
Yamaha website (http://www.yamaha.com/). Depending on your locale, Expansion
Packs may be available for expanding Voices and Styles unique or native to your
particular area.
Installing an Expansion Pack
1
Connect the USB storage device which contains the Expansion
Pack file to the [USB TO DEVICE] terminal of the instrument.
2
Call up the operation display.
[FUNCTION] → [J] EXPANSION PACK INSTALLATION → TAB [E][F]
USB
3
Use the [A] – [J] buttons to select the desired Expansion Pack file
to install.
4
Press the [6 ▼] (INSTALL) button to install the data to the
instrument.
Follow the on-display instructions.
5
Press the [F] (YES) button when the message indicating
completion of the install operation appears.
The instrument will be restarted automatically.
6
Press the [EXPANSION/USER] button in the VOICE or STYLE
category selection button to see if the Expansion Pack data is
installed successfully.
Expansion Voices or Styles can be found in the Expansion folder of the USER
tab display.
4
PSR-A2000 Owner's Manual
NOTICE
This instrument allows you to
install only one Expansion Pack.
Installing an Expansion Pack
will erase all the previously
existing Expansion Pack data in
the instrument. Make sure to
keep a copy of the Expansion
Pack data in a USB storage
device for future use.
NOTE
Before using a USB storage device, be
sure to read "Connecting a USB Stor-
age Device" on page 93.
NOTE
You can call up the information for the
selected Expansion Pack by pressing
the [7 ▲] (INFO.) button. To close the
information display, press the [EXIT]
button.
NOTICE
The instrument will be restarted
when installation is completed.
Save all the data currently being
edited beforehand, otherwise
the data will be lost.
NOTE
If a message appears indicating that
the drive does not have enough free
space, move the files in the USER tab
to the USB tab, then try installing
again. Refer to page 28 for details on
the Move operations.
39
1