Figure 3-18. Installing or Removing Expansion-Card Riser 2
1
6
5
1
expansion-card riser 2
3
slot on chassis
5
riser guide pins (2)
Installing Expansion-Card Riser 2
1 Align the expansion-card riser with the riser guide pins on the system
board and the slot on the chassis. See Figure 3-17.
2 Lower the expansion-card riser into place until the expansion-card riser
connector is fully seated.
3 If applicable, reinstall the expansion card(s). See "Installing an Expansion
Card" on page 116.
122
Installing System Components
2
4
2
expansion-card slot 5
4
riser 2 connector on system board
6
expansion-card slot 6
3