Setting Up The Machine; Install The Toner Cartridges - Brother MFC 9420CN - Color Laser - All-in-One Quick Setup Manual

Step 1
Install the Toner
1
cartridges
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Remove the protective tape.
2
Open the front cover.
Front cover
3
Remove the protective part.
4

Setting Up the machine

4
Take out all the toner cartridges from the
machine.
5
Carefully pull the protective part out of the
machine.
6
Rock the toner cartridge 3 to 4 times.
7
Pull off the tape labeled REMOVE, and then
remove the orange protective cover.
REMOVE tape
Go to the next page
Protective cover