Table of Contents
Advertisement
4-2
Setting Up the Hub
Command Descriptions
For a complete listing and detailed description of all the commands, refer to
Appendix C, "Commands."
Display of Command Results
You can use the set commands to change various parameters. The results of
several management console command actions are shown in a two-line display,
as follows:
Current . . . .
Initialize . . . .
Where Current is the present parameter setting and Initialize is the desired
parameter setting that will take effect when the hub is reset.
For a list of the set commands with brief definitions, type:
or
set ?
set help
For a list of the show commands with brief definitions, type:
or
show ?
show help
To display a list of the miscellaneous commands with brief definitions,
type:
or
help
?
Advertisement
Table of Contents
