GE JT965 Owner's Manual page 45

www.GEAppliances.com
Lower oven control
signals after entering
cooking time or
delay start
Possible Causes
You forgot to enter a
bake temperature or
clemfing time.
What To Do
• Press the BAKE pad and desired temperature or tile
SELF CLEAN pad and desired clean time.
Food does not bake or Oven controls improperly set. • See tile Using the lower oven section.
mast properly in the
lower oven Shelf position is incorrect • See the Using the lower oven se('ti_m.
or the shelf is not level.
Incorrect cookware or • See the Using the lower oven section.
cookware of improper
size being used.
Oven thermostat needs • See the Adjust the lower oven thermostat--Do it yourself!
adjustment, section.
Food does notbroil Oven controls improperly set. • Make stu'e you press the BROIL HI/LO pad.
properly in the
lower oven hnproper shelf position • See the Broiling Guide.
being used.
Cookware not suited • Else the broiling pan and grid that came with wmr oven.
for broiling,
Alumhamn foil used on the • See the Using the lower oven section.
the hroiling pan and grid has
not been fitted properly mad
slit as recommended.
In some areas the power • Preheat the broil element tbr 10 minutes.
voltage) maybe low. • Broil fl)r the lon,_est_ , period of time recommended in
the Broiling Guide.
Clock and timer A fuse in your home may be • Replace the fl/se or reset the circuit breakel;
do not work or blown or the circuit breaker
display goes blank
tripped.
Controls improperly set. • See the Using the clock and lower oven timer secti_m
fi)r the h)wer oven oh)ok.
The clock is in the
black-out mode.
• See tile Display On/Offsecfion fiw tile microwaxe oven dock.
• See tile
Special
features of your lower oven control
section tor tile h)wer ox, en
clock,
• See tile
Display
On/Offsecfion fiw tile microwave oven clock.
45