How To Start The Program - ScanSoft PE16 - WorkCentre B/W Laser User Manual

16 I
NSTALLATION AND SETUP
To change the scanner settings at a later time, or to set up a different
scanner, or to test and repair an installed scanner, please follow one of
these two methods to reopen the Scanner Wizard:
Start É Programs É ScanSoft OmniPage SE É Scanner Wizard or
u
Start É Programs É ScanSoft OmniPage SE É OmniPage
u
SE É Tools menu É Options É Scanner... É Setup button.
Note
To test and repair an improperly functioning scanner, follow the
procedure above, selecting 'Test and configure current scanning source' at
the start of the process.
H
OW TO START THE PROGRAM
To start OmniPage SE do one of the following:
u
Click Start in the Windows taskbar and choose
Programs É ScanSoft OmniPage SE É OmniPage SE.
u
Double-click the OmniPage SE icon in the program's installation
folder or on the Windows desktop if you placed it there.
u
Double-click an OmniPage Document (OPD) icon or file name;
the clicked document is loaded into the program. See OmniPage
Documents in chapter 2.
On opening, OmniPage SE's title screen is displayed and then its desktop.
See chapter 2 for an introduction to OmniPage SE's desktop.
There are several ways of running the program with a limited interface:
u
Use the Schedule OCR program. Click Start in the Windows
taskbar and choose Programs É ScanSoft OmniPage SE É
Schedule OCR. See Processing documents with Schedule OCR in
chapter 3.
u
Click Acquire Text from the File menu of an application
registered with the Direct OCR™ facility. See How to set up
Direct OCR in chapter 3.