Ricoh Aficio MP C2500 EFI General Settings Manual page 33

Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.58 "Interface Settings"
p.68 "File Transfer"
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending file with IEEE 1394 interface
cable.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/IEEE 1394 IPv4 Address
Interface Settings/IEEE 1394 DDNS Configuration
Interface Settings/IEEE 1394 Host Name
Interface Settings/IEEE 1394 Domain Name
Interface Settings/IEEE 1394 WINS Configuration
Interface Settings/IEEE 1394 IPv4 over 1394
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network Effective Protocol
File Transfer
File Transfer
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.58 "Interface Settings"
p.68 "File Transfer"
User Tool
Scanner Resend Interval Time
Number of Scanner Resends
Network Settings
Setting Requirements
Neccessary
As required
As required
As required
As required
Neccessary
Neccessary
As required
Neccessary
As required
As required
1
25