Ricoh Aficio MP C2500 EFI General Settings Manual page 22

Connecting the Machine
Menu
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
1
Interface Settings/Network Host Name
Interface Settings/Network Machine Name
Note
❒ IPv6 can be used only for the printer function.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN board is installed. If Ethernet
and IEEE 802.11b (wireless LAN) are both connected, the selected interface
has priority.
Reference
p.58 "Interface Settings"
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 1394 interface cable.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/IEEE 1394 IPv4 Address
Interface Settings/IEEE 1394 DDNS Configuration
Interface Settings/IEEE 1394 Host Name
Interface Settings/IEEE 1394 Domain Name
Interface Settings/IEEE 1394 WINS Configuration
Interface Settings/IEEE 1394 IPv4 over 1394
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network Effective Protocol
Note
❒ [IEEE 1394]appears when IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.58 "Interface Settings"
14
User Tool
User Tool
Setting Requirements
As required
As required
As required
As required
Setting Requirements
Neccessary
As required
As required
As required
As required
Neccessary
As required
As required
Neccessary