Loading Paper Into The Bypass Tray; How To Load Paper Into The Bypass Tray - Konica Minolta bizhub C754 User Manual

6.4

Loading paper into the Bypass Tray

6.4 Loading paper into the Bypass Tray

How to load paper into the Bypass Tray

When selecting a paper size other than for paper trays or printing on envelopes or transparencies, use the
Bypass Tray.
To use the Bypass Tray, load paper and specify the paper type.
1
Open the Bypass Tray.
% To load large-sized paper, pull out the Tray Extension.
NOTICE
Be careful not to touch the surface of the Paper Feed Rollers
with your hand.
2
With the side to be printed on facing down, insert the paper as far as possible into the feed slot.
% When printing on letterhead (paper where company names, preset text, and other text or images
are already printed), load it with the print side facing up.
NOTICE
Do not load an excessive number of sheets such that the top of the stack is higher than the , mark.
If paper is curled, flatten it before loading it.
3
Slide the Lateral Guide to fit the size of the loaded paper.
4
When loading paper other than plain paper, change the paper type setting. When loading custom sized
paper, also specify the paper size.
% For details, refer to [User's Guide: Copy Operations].
bizhub C754/C654
6
6-6