Loading Paper In Tray 3 Or Tray 4 - Konica Minolta bizhub C754 User Manual

6.3

Loading paper in Tray 3 or Tray 4

6.3 Loading paper in Tray 3 or Tray 4
You can load a larger amount of paper into Tray 3 or Tray 4 than Tray 1 or Tray 2. It will be convenient to
load the most frequently used paper into Tray 3 or Tray 4. The following explains how to load paper into Tray
3.
1
Pull out Tray 3.
NOTICE
Be careful not to touch the surface of the Paper Feed Rollers
with your hand.
2
Lift the Paper Feed Rollers, and load the paper with the re-
quired side facing upward.
% When printing on letterhead (paper where company
names, preset text, and other text or images are already
printed), load it with the print side facing down.
% For details on the available paper sizes, refer to [User's
Guide: About This Machine].
NOTICE
Do not load an excessive number of sheets such that the top
of the stack is higher than the , mark.
Do not load custom sized paper into Tray 3. When changing
the paper size, contact your service representative.
If paper is curled, flatten it before loading it.
3
Lower the Paper Feed Rollers, then close Tray 3.
4
When loading paper other than plain paper, change the paper type setting.
% For details, refer to [User's Guide: Copy Operations].
bizhub C754/C654
6
6-5