Automatically Registering A License Via Internet - Konica Minolta bizhub C654 User Manual

2.2

Automatically registering a license via internet

2.2 Automatically registering a license via internet
Automatically perform a procedure from the step where the user registers a license on this machine via the
License Management Server (LMS) on the Internet to the step where the user enables an advanced function
on this machine.
0 Check that this machine can be connected to the Internet.
1
Purchase a required license kit.
% For details on the types of license kits, refer to page 1-3.
% License registration requires a token certificate included in a license kit.
% For details on purchasing a license kit, contact your service representative.
2
Select [Utility] - [Administrator Settings] - [License Settings] - [Install License] - [Token Code], and enter
a token number.
% A token number is shown in the token certificate.
% When necessary, you can enter a token number using Web Connection. In the administrator mode,
select [Maintenance] - [License Settings] - [Install License using the Token Code].
3
Tap [Install].
4
Check the token number you entered, select [Yes], then tap [OK].
This machine establishes communication with the License Management Server, and enables the ad-
vanced function managed by the token number. When the license registration and advanced function
enabling steps are ended normally, this machine restarts automatically.
Tips
- To register a license via Internet, connect this machine to the License Management Server through a
proxy server for remote diagnosis. How to configure a proxy server for remote diagnosis is explained
using Web Connection. For details, refer to [User's Guide: Web Management Tools].
bizhub C754/C654
2
2-3