In The Paper Exit Area - Samsung SCX4521F - B/W Laser - All-in-One Service Manual

Alignment and Adjustments

4.6.3.3 In the Paper Exit Area

1. Open and close the front door. The jammed paper
automatically exits the machine.
If the paper does not exit, continue to step 2.
2. Gently pull the paper out of the output tray.
3. If there is any resistance and the paper does not
move when you pull, or if you cannot see the paper
in the output tray, open the rear door by pulling the
tab on it.
Service Manual
4-25
4. Remove the jammed paper by gently pulling it
straight out.
NOTE: Inside of the machine is hot. Take care
when removing paper from the machine.
5. Close the rear door.
6. Open and close the front door to resume printing.
Samsung Electronics