Adf Housing - Samsung SCX4521F - B/W Laser - All-in-One Service Manual

5.10 ADF Housing

1. Before you remove the ADF Housing, you should
remove:
- Scan Ass'y (Refer to the 5.9)
2. Open the ADF Housing and insurt a flat-blade
screwdriver into the slot as shown below, and
remove the Cap-Hinge from the Platen Housing
and ADF Housing.
Cap-Hinge
3. Remove the ADF Housing from the Platen
Housing. At that time, carefully release the ADF
Motor Harness from the Platen Housing, as shown
below.
Scan Motor
Harness
Samsung Electronics
ADF Housing
4. Remove the two screws securing the ADF Ass'y
and remove it. At that time, carefully release the
ADF Motor Harness from the Platen Cover, as
shown below.
5. If necessary, remove the two screws securing the
TX Stacker Ass'y and remove it, as shown below.
Disassembly and Reassembly
ADF Ass'y
ADF Motor Harness
TX Stacker Ass'y
Platen Cover
Service Manual
5-9