Starting The Remote Ui - Canon MF7280 - ImageCLASS B/W Laser Remote Ui Manual

Starting the Remote UI

To start the Remote UI, follow the procedure described below.
1
Start your web browser.
2
Enter the appropriate URL into [Address] or [Location].
http://<the IP address of the machine>/
The Remote UI's top page is displayed.
NOTE
•
If you do not know the appropriate URL, consult your system administrator.
•
You can change the language displayed on the screen by clicking the Display
Language drop-down list and selecting the desired language, regardless of the
language used on the touch panel display of the machine.
•
If you change the language, characters of the displayed language can be entered.
However, if the displayed language is different from the language used on the touch
panel display of the machine, the language may not be displayed correctly.
•
If Language Switch is set to 'On' from the touch panel of the machine, some
characters are restricted and cannot be entered.

Starting the Remote UI

1
1-9