8
In the same way, specify the settings for subsequent tab paper
sheets.
NOTE
•
If the sequence number of the tab paper differs from that of the insertion positions,
ascending sequence is applied after clicking [Done].
•
The available range for the insertion position is from pages 1 to 999.
9
Specify the width to shift the image to be printed on the tab
part of the paper in [Shifting Width].
NOTE
You can change the unit used to specify the shift width (millimeters or inches).
10
Click [OK].
The [Inserting Sheet Settings] dialog box closes.
11
Click [OK].
Creating Tabs
NOTE
•
This option is available for the imageRUNNER C5870, imageRUNNER C6870,
imageRUNNER 105+, imageRUNNER 5070, imageRUNNER 6570/5570,
imageRUNNER 7105/7095/7086, imageRUNNER 8070, imageRUNNER 85+, and
imageRUNNER 9070.
•
If [Off], [Group], or [Rotate] is selected for [Finishing] in the [Finishing] sheet, this option is
not available.
•
Before creating tab paper, open the printer properties dialog box from the [Printers] folder
➞ click [Form to Tray Assignment] on the [Device Settings] sheet ➞ select [Tab Paper]
from [Paper Type] in the [Form to Tray Assignment] dialog box.
1
From the printer properties dialog box, click the [Paper
Source] tab.
Using Cover or Sheet Insertion Options
3
3-43