Using Bradmin Professional Utility And The Tcp/Ip Protocol To Set The Ip Address - Brother MFC 620CN - Color Inkjet - All-in-One Network User's Manual

Using BRAdmin Professional utility and the TCP/
IP Protocol to set the IP address
If your PC is using the TCP/IP protocol, do the following:
1
Select TCP/IP filter in the left frame of the main BRAdmin
window.
2
Select the Device menu and choose the Search Active
Devices.
If the Print/Scan server is set to its factory default settings
without using a DHCP server, the device will appear as
APIPA in the BRAdmin Professional utility screen.
3
Select the Devices menu and choose Setup Unconfigured
Devices.
4
Select the MAC address of your Print/Scan server and click the
Configure button.
You can find the node name and MAC address by printing out the
machine configuration page. See page 3-11 for information on how
to print the configuration page on your Print/Scan server.
5
Enter the IP address, Subnet mask and Gateway (if needed)
of your Print/Scan server.
6
Click OK then select Close.
7
With the correctly programmed IP address, you will see the
Brother Print/Scan server in the device list.
TCP/IP CONFIGURATION 2 - 3