2
REMOTE
COPY
6
SELECT DESTINATION
LTR
Select the Remote
destination Printer
(PC's IP Address)
(See page 47)
3
REMOTE COPY
NO. OF COPY=_
Number of
Copies
(1-99)
7
Scanned image data will be
transferred to the selected PC.
4
PC will output the received data
to the default (desired) printer.
NOTE:
The paper size defaults to the
size which has been set by the
remote copy configuration and
the output printer driver. There
are times when the paper size
differs from the scanning size
assigned in Step 5.
(Refer to the Remote Copy
Section on the Operating
Instructions for Document
Management System and
Printer.)
5
53