Department Counter; Network Settings - Panasonic Workio DP-190 Operating Instructions Manual

Function
For Example

■ Department Counter

The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers
for each department. (Maximum Number of Departments: 50)
Contact your authorized service provider to enable the Department Counter feature.
1
If set in other
function mode
7
KEY OPR. MODE ( 00-31 )
ENTER NO. OR ∨ ^
or
13 (DEPT. COUNTER MODE)
11 For Department Counter
DEPT. COUNTER
01:123145

■ Network Settings

When the Parameter No. "22 DHCP DEFAULT" is set
to "INVALID", the Key Operator must administer the
following Network settings manually.
Enter these required Network setting: 19 (TCP/IP
ADDRESS), 20 (TCP/IP SUBNET MSK) and 21 (TCP/
IP G/W ADDR), in the same manner as shown in the
following example.
5
19 TCP/IP ADDRESS
44
2
8
13 DEPT. COUNTER MODE
1: TOTAL COUNTER
For Maximum Copies
MAX COPIES
01:12345678
Clear the
counter to "0".
19 TCP/IP ADDRESS
192.168.1.100
Input the TCP/IP Address
Ex.: 192.168.1.100
Use the " " key to enter a period.
1 → 9 → 2 →
→ 1 → 6 → 8 →
→ 1 → → 1 → 0 → 0
3
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ^
1: General Settings
For ID (Identification) Code
ID CODE
01:12345678
Maximum
number of
Copies (8-digit)
1
Same procedure as in
steps 1 to 6 above.
6
20 TCP/IP SUBNET MSK
Input Subnet Mask;
same procedure as step 5.
or
ID Code
(1 to 8-digit)