Specifying Single-Sided/Double-Sided Printing; Specifying Finishing Settings - Konica Minolta bizhub C451 User Manual

Printing a user box document

Specifying single-sided/double-sided printing

Select whether a single-sided or double-sided copy of the document is to be
printed.
% Touch [1-Sided] or [2-Sided].

Specifying Finishing settings

Specify settings for collating, grouping, stapling, hole punching, folding/
binding or center stapling/folding. Settings can be specified for the following.
Parameter
Sort
Group
Offset
Staple
Punch
Half-Fold (Center Staple/
Fold):
C451
Description
Select this setting to feed out copies of the document by sets.
Select this setting to feed out copies of the document by page.
Select this setting to separate the sets or pages of the copies.
If a finisher is installed, the printed pages are fed out with each set
shifted to separate it.
If no finisher is installed, the printed pages are fed out sorted in an
alternating crisscross pattern.
Select one of these settings to bind copies with a staple in the corner
(upper left or upper right) or with two staples. The stapling position
can also be selected.
Select a setting to punch holes in copies. The position of the
punched holes can also be selected.
Select this setting to fold copies in half before feeding them out.
4
4-9