Emerson 1051 Instruction Manual page 36

1051 & 1052 H & J
Fishtail and Fisher are marks owned by Fisher Controls International LLC, a member of the Emerson Process Management business division of
Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co.
All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are
not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability.
We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use and
maintenance of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end-user.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Cernay 68700 France
Sao Paulo 05424 Brazil
Singapore 128461
www.Fisher.com
36
EFisher Controls International LLC 1984, 2006; All Rights Reserved
38B5654-B
A7238 / IL
Figure 17. Adjustable Down Travel Stop
Printed in USA
NOTE:
FOR SIZE 60 ACTUATORS, A
SECOND HEX NUT (KEY 54) IS
USED IN THE PLACE OF THE
HEX NUT (KEY 63)
Instruction Manual
Form 5587
November 2006