Ai Tweaker Menu; Oc Tuner Utility; Oc Tuner Limit Value - Asus P7P55D Deluxe - Motherboard - ATX User Manual

3.5

Ai Tweaker menu

The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this chapter vary depending on the CPU and DIMM model you
installed on the motherboard.
Main Ai Tweaker
Configure System Performance Settings

OC Tuner Utility

OC Tuner limit Value

Ai Overclock Tuner
CPU Ratio Setting
Intel(R) SpeedStep(TM) Tech
Intel(R) TurboMode Tech
Xtreme Phase Full Power Mode
DRAM Frequency
DRAM Timing Control
CPU Differential Amplitude
CPU Clock Skew
******* Please key in numbers directly! *******
CPU Voltage Mode
Offset Voltage
Current CPU Core Voltage
IMC Voltage
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Scroll down to display the following items:
Current IMC Voltage
DRAM Voltage
Current DRAM Voltage
CPU PLL Voltage
Current CPU PLL Voltage
PCH Voltage
Current PCH Voltage
DRAM DATA REF Voltage on CHA
DRAM CTRL REF Voltage on CHA
DRAM DATA REF Voltage on CHB
DRAM CTRL REF Voltage on CHB
***********************************************
Load-Line Calibration
CPU Spread Spectrum
PCIE Spread Spectrum
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.5.1 OC Tuner Utility
Press the <ENTER> key to start automatic system overclocking. The OC Tuner Utility
automatically adjust system parameters and reboots several times for the best overclocking
result. DO NOT shut down the power before the auto-adjustment completes.
3.5.2 OC Tuner limit Value [Good Performance]
Set an auto-adjustment limit value for OC Tuner Utility.
Configuration options: [Good Performance] [Better Performance]
3-12
BIOS SETUP UTILITY
Advanced Power
[Good Performance]
[Auto]
[Auto]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Offset]
[Auto]
[ 1.048V]
[Auto]
[ 1.109V]
[Auto]
[ 1.500V]
[Auto]
[ 1.800V]
[Auto]
[ 1.040V]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Boot Tools Exit
Press ENTER to run the
utility to Tuner BCLK.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 3: BIOS setup