Boot Menu; Boot Device Priority - Asus P7H55 User Manual

Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature and
allows you to set the appropriate performance level of the chassis fan.
[Standard]
[Silent]
[Turbo]
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignored if you do not want to detect this item.
2.7

Boot menu

The Boot menu items allow you to change the system boot options. Select an item then press
<Enter> to display the submenu.
Main Ai Tweaker
Boot Settings

Boot Device Priority

Boot Settings Configuration
Security
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
2.7.1 Boot Device Priority
1st ~ xxth Boot Device [Removable Dev.]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]
• To select the boot device during system startup, press <F8> when ASUS Logo appears.
• To access Windows
•
•
Chapter 2: BIOS information
Sets to [Standard] to make the chassis fan automatically adjust
depending on the chassis temperature.
Sets to [Silent] to minimize the fan speed for quiet chassis fan
operation.
Set to [Turbo] to achieve maximum chassis fan speed.
BIOS SETUP UTILITY
Advanced Power
OS in Safe Mode, do any of the following:
®
Press <F5> when ASUS Logo appears.
Press <F8> after POST.
Boot Tools Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
2-23