Gigabyte GA-890FXA-UD7 User Manual page 92

7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in the main
screen to save your settings before exiting the RAID BIOS utility, then press <Y> (Figure 10).
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID
[ fg TAB]-Switch Window
Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA RAID/
AHCI driver and operating system.
Delete the RAID Array:
To delete the array, select Delete RAID Disk Drive in the main menu and press <Enter>. The selection bar
will move to the RAID Disk Drive List block. Press the <SPACE> key on the array to be deleted; a small tri-
angle will appear to mark the selected array. Press <Delete>. When prompted to confirm your selection (Figure
11), press <Y> to confirm or <N> to cancel.
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID

[ hi ]-Select RAID
Appendix
Gigabyte Technology Corp. RAID Setup Utility v1.07.16G
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
Save to Disk & Exit (Y/N) ? Y
RAID Level
0-Stripe
[ hi ]-Select ITEM
Figure 10
Gigabyte Technology Corp. RAID Setup Utility v1.07.16G
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
ALL DATA ON THE RAID WILL LOST!!
ARE YOU SURE TO DELETE (Y/N) ? N
RAID Level
0-Stripe
[SPACE]-Mark Delete
Figure 11
Capacity Status
240 GB Normal
[ENTER]-Action
Capacity Status
240 GB Normal
[DEL]-Confirm
- 92 -
Capacity Type/Status
120 GB RAID Inside
120 GB RAID Inside
Members(HDDx)
01
[ESC]-Exit
Capacity Type/Status
120 GB RAID Inside
120 GB RAID Inside
Members(HDDx)
01
[ESC]-Abort