Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Intel BOXDP55WG
Summary of Contents for Intel BOXDP55WG
- Page 1 Intel® Desktop Board DP55WG Product Guide Order Number: E62931-003...
-
Page 2: Revision History
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. -
Page 3: Intended Audience
The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel. Document Organization The chapters in this Product Guide are arranged as follows:... - Page 4 Intel Desktop Board DP55WG Product Guide Terminology The table below gives descriptions of some common terms used in the product guide. Term Description Gigabyte (1,073,741,824 bytes) Gigahertz (one billion hertz) Kilobyte (1024 bytes) Megabyte (1,048,576 bytes) Megabit (1,048,576 bits) Megahertz (one million hertz)
-
Page 5: Table Of Contents
Contents 1 Desktop Board Features Supported Operating Systems................11 Desktop Board Components.................12 Processor......................14 Main Memory.....................15 ® Intel P55 Express Chipset ..................16 Audio Subsystem ....................16 LAN Subsystem ....................16 USB 2.0 Support ....................17 Serial ATA Support .....................17 Legacy I/O ......................19 Expandability.....................19 BIOS ........................19 Serial ATA Auto Configuration...............19... - Page 6 Recovering the BIOS ...................68 ® 4 Configuring for RAID Using Intel Matrix Storage Technology Configuring the BIOS..................69 Creating Your RAID Set..................69 Loading the Intel Matrix Storage Technology RAID Drivers and Software (Required for Microsoft Windows XP Installation)..........70 Setting Up a “RAID Ready” System...............70...
- Page 7 6. Location of the Processor and Voltage Regulator LEDs........26 7. Location of the Back to BIOS Button..............27 8. Installing the I/O Shield ................31 9. Intel Desktop Board DP55WG Mounting Screw Hole Locations ......32 10. Unlatch the Socket Lever ................33 11. Lift the Load Plate..................34 12.
- Page 8 31. Location of the BIOS Configuration Jumper Block ..........56 32. Removing the Battery ...................63 33. Location of the POST Code LED Display............73 34. Intel Desktop Board DP55WG China RoHS Material Self Declaration Table.....85 Tables 1. Feature Summary..................9 2. Intel Desktop Board DP55WG Components............13 3.
-
Page 9: Desktop Board Features
• Support for non-ECC memory • Support for up to 16 GB of system memory ® Chipset Intel P55 Express Chipset consisting of the Intel P55 Express Chipset Platform Controller Hub (PCH) Graphics Support for multiple PCI Express* 2.0 graphics cards Audio •... - Page 10 Table 1. Feature Summary (continued) ® RAID Intel Matrix Storage Technology for Serial ATA LAN Support Intel 82578DM Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs ® BIOS • Intel Platform Innovation Framework for extensible firmware interface •...
-
Page 11: Supported Operating Systems
Desktop Board Features Supported Operating Systems The Desktop Board supports the following operating systems: • Microsoft Windows* 7 Ultimate 64-bit edition • Microsoft Windows 7 Ultimate 32-bit edition • Microsoft Windows 7 Home Basic 64-bit edition • Microsoft Windows 7 Home Basic 32-bit edition •... -
Page 12: Desktop Board Components
Intel Desktop Board DP55WG Product Guide Desktop Board Components Figure 1 shows the approximate location of the major components on Intel Desktop Board DP55WG. Figure 1. Intel Desktop Board DP55WG Components... - Page 13 Desktop Board Features Table 2. Intel Desktop Board DP55WG Components Label Description PCI bus connector PCI Express 2.0 x4 connector (x4 electrical; x16 compatible) PCI bus connector PCI Express 2.0 x8 connector (x8 electrical; x16 compatible) Front panel audio header S/PDIF header PCI Express 2.0 x1 connector...
-
Page 14: Processor
Intel Desktop Board DP55WG Product Guide Online Support For more information on Intel Desktop Board DP55WG consult the following online resources: • Intel Desktop Board DP55WG http://www.intel.com/products/motherboard/DP55WG /index.htm • Desktop Board Support http://support.intel.com/support/motherboards/deskt op/DP55WG • Available configurations for Intel http://www.intel.com/products/motherboard/DP55WG Desktop Board DP55WG /index.htm... -
Page 15: Main Memory
Main Memory NOTE ® To be fully compliant with all applicable Intel SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. -
Page 16: Intel P55 Express Chipset
® Intel P55 Express Chipset The Intel P55 Express Chipset consists of the Intel P55 Express Platform Controller Hub (PCH). The PCH is the centralized controller for the board’s I/O paths. Audio Subsystem The onboard audio subsystem consists of the following components: ®... -
Page 17: Usb 2.0 Support
USB 1.1 operation. This may be required to accommodate operating systems that do not support USB 2.0. Serial ATA Support Intel Desktop Board DP55WG supports six onboard 3.0 Gb/s Serial ATA (SATA) channels via the PCH. The Desktop Board includes a SATA drive activity indicator (a blue LED) shown in... -
Page 18: Sata Drive Activity Led
Intel Desktop Board DP55WG Product Guide Figure 3. SATA Drive Activity LED The six onboard SATA channels support the following Intel Matrix Storage Technology RAID (Redundant Array of Independent Drives) levels: • RAID 0 - data striping • RAID 1 - data mirroring •... -
Page 19: Legacy I/O
Desktop Board Features Legacy I/O Intel Desktop Board DP55WG includes an I/O controller that provides the following legacy I/O features: • Consumer Infrared (CIR) support • Low pin count (LPC) interface • Intelligent power management, including a programmable wake up event interface •... -
Page 20: Security Passwords
For instructions on resetting the password, go to “Clearing Passwords” on page 57. Hardware Management The hardware management features of Intel Desktop Board DP55WG enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features including the following: •... -
Page 21: Chassis Intrusion
Desktop Board Features Chassis Intrusion The board supports a chassis security feature that detects if the chassis cover has been removed. The security feature uses a mechanical switch on the chassis that can be connected to the chassis intrusion header on the Desktop Board. See Figure 27 for the location of the chassis intrusion header. -
Page 22: Fan Headers
Intel Desktop Board DP55WG Product Guide Fan Headers The function/operation of the fans is as follows: • The fans are on when the computer is in the ACPI S0 state. • The fans are off when the computer is in the ACPI S3, S4, or S5 state. -
Page 23: +5 V Standby Power Indicator
For example, when this green LED is lit, standby power is still present at the memory module sockets and the PCI bus connectors. Figure 4. Location of the Standby Power Indicator For more information on standby current requirements for the Desktop Board, refer to the Technical Product Specification at http://support.intel.com/support/motherboards/desktop/. -
Page 24: Wake From Usb
ENERGY STAR*, e-Standby, and EuP Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of the new requirements. This Desktop Board meets the ENERGY STAR Program for Computers: Version 5.0... -
Page 25: Onboard Power Button
Desktop Board Features Onboard Power Button CAUTION Electrostatic discharge (ESD) can damage components. Perform the procedure described in this section only at an ESD workstation using an antistatic wrist strap and a conductive foam pad. If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. -
Page 26: Processor And Voltage Regulator Leds
Intel Desktop Board DP55WG Product Guide Processor and Voltage Regulator LEDs The Desktop Board contains two red LEDs (see Figure 6) that indicate the status of the board’s voltage regulation circuitry and the processor: • The Processor LED (Figure 6, A) indicates an elevated temperature on the processor that could affect performance. -
Page 27: Back To Bios Button
Desktop Board Features Back to BIOS Button The Back to BIOS button (Figure 7, A) duplicates the functionality of the BIOS configuration jumper (see Setting the BIOS Configuration Jumper on page 56) with the following exceptions: • It can only be used to force the board to power on to the BIOS Maintenance Menu using default values. -
Page 28: Speaker
Intel Desktop Board DP55WG Product Guide Speaker A speaker is mounted on the Desktop Board. The speaker provides audible error code (beep code) information during the Power-On Self-Test (POST). Refer to Appendix A for a description of the board’s beep codes. -
Page 29: Installing And Replacing Desktop Board Components
2 Installing and Replacing Desktop Board Components This chapter tells you how to: • Install the I/O shield • Install and remove the Desktop Board • Install and remove a processor • Install and remove memory • Install and remove a PCI Express x16 graphics card •... -
Page 30: Installation Precautions
Intel Desktop Board DP55WG Product Guide Installation Precautions When you install and test the Intel Desktop Board, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: • Sharp pins on connectors • Sharp pins on printed circuit assemblies •... -
Page 31: Installing The I/O Shield
Installing and Replacing Desktop Board Components Installing the I/O Shield The Desktop Board comes with an I/O shield. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Install the I/O shield before installing the Desktop Board in the chassis. -
Page 32: Installing And Removing The Desktop Board
Refer to your chassis manual for instructions on installing and removing the Desktop Board. Figure 9 shows the location of the mounting screw holes for Intel Desktop Board DP55WG. Figure 9. Intel Desktop Board DP55WG Mounting Screw Hole Locations... -
Page 33: Installing And Removing A Processor
Installing and Replacing Desktop Board Components Installing and Removing a Processor Instructions on how to install the processor on the Desktop Board are given below. Installing a Processor CAUTION Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer;... -
Page 34: Lift The Load Plate
Intel Desktop Board DP55WG Product Guide 3. Rotate the socket lever to lift the load plate away from the socket (Figure 11, A). Make sure that the load plate is in the fully open position (Figure 11, B) while being careful not to damage adjacent components. -
Page 35: Remove The Socket Cover
Installing and Replacing Desktop Board Components 4. Remove the protective socket cover from the socket by placing your thumb against the front edge of the cover and resting your index finger on the rear grip (Figure 12, A). Lift the front edge of the socket to disengage the cover from the socket and lift the cover up and away from the socket (Figure 12, B). -
Page 36: Remove The Processor From The Protective Cover
Intel Desktop Board DP55WG Product Guide 5. Remove the processor from its protective cover. Hold the processor only at the edges, being careful not to touch the bottom of the processor (see Figure 13). NOTE Do not discard the processor cover. Always replace the processor cover if the you remove the processor from the socket. -
Page 37: Lower The Load Plate
Installing and Replacing Desktop Board Components 7. Lower the load plate over the processor while leaving the socket lever in the open position (Figure 15). Figure 15. Lower the Load Plate 8. Lower the socket lever (Figure 16, B) while making sure that the front edge of the load plate slides under the shoulder screw cap as the lever is lowered (Figure 16, A). -
Page 38: Installing The Processor Fan Heat Sink
Intel Desktop Board DP55WG Product Guide Installing the Processor Fan Heat Sink Intel Desktop Board DP55WG has mounting holes for a processor fan heat sink. For instructions on how to attach the processor fan heat sink to the Desktop Board, refer to the boxed processor manual or boxed thermal solution manual. -
Page 39: Installing And Removing System Memory
Desktop board DP55WG has four 240-pin DDR3 DIMM sockets arranged as DIMM 0 and DIMM 1 in both Channel A and Channel B. NOTE The Intel P55 Express Chipset requires memory to be installed in the Channel A, DIMM 0 slot. Guidelines for Dual Channel Memory Configuration Before installing DIMMs, read and follow these guidelines for dual channel memory configuration. -
Page 40: Three Dimms
Intel Desktop Board DP55WG Product Guide Figure 19. Example Dual Channel Memory Configuration with Four DIMMs Three DIMMs If you want to use three DIMMs in a dual-channel configuration, install a matched pair of DIMMs equal in speed and size in DIMM 0 (blue) and DIMM 1 (black) of channel A. -
Page 41: Installing Dimms
Installing and Replacing Desktop Board Components Installing DIMMs To make sure you have the correct DIMM, place it on the illustration of the DDR3 DIMM in Figure 21. All the notches should match with the DDR3 DIMM. Figure 21. Use DDR3 DIMMs... -
Page 42: Installing A Dimm
Intel Desktop Board DP55WG Product Guide NOTE For best memory performance, install memory in the blue DIMM sockets first. To install a DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" on page 29. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. -
Page 43: Removing Dimms
Installing and Replacing Desktop Board Components 10. Reinstall the PCI Express graphics card (see Installing a PCI Express x16 Graphics Card on page 43) if it was removed in Step 4. 11. Replace the computer’s cover and reconnect the AC power cord. Removing DIMMs To remove a DIMM, follow these steps: 1. -
Page 44: Removing A Pci Express X16 Graphics Card
Intel Desktop Board DP55WG Product Guide Follow these instructions to install a PCI Express x16 graphics card: 1. Observe the precautions in "Before You Begin" on page 29. 2. Place the card in the PCI Express x16 connector (Figure 23, A) and press down on the card until it is completely seated in the connector and the card retention notch on the card snaps into place around the retention mechanism pin on the connector. -
Page 45: Installing Linked Pci Express Graphics Cards
Installing and Replacing Desktop Board Components Figure 24. Removing a PCI Express x16 Graphics Card Installing Linked PCI Express Graphics Cards The Desktop Board supports technology that allows you to install linked PCI Express graphics cards such as NVIDIA* SLI* (Scalable Link Interface) cards. Make sure you use two identical SLI-ready graphics cards that are NVIDIA certified and the latest graphics driver. -
Page 46: Installing Linked Pci Express Graphics Cards
Intel Desktop Board DP55WG Product Guide 6. Connect the monitor cable to the graphics card according to the manufacturer’s instructions. Figure 25. Installing Linked PCI Express Graphics Cards For more complete installation and configuration information refer to the documentation supplied by the graphics card manufacturer or visit their website. -
Page 47: Connecting The Serial Ata (Sata) Cables
Installing and Replacing Desktop Board Components Connecting the Serial ATA (SATA) Cables SATA cables support the Serial ATA protocol. Each cable can be used to connect one internal SATA drive to the Desktop Board. For correct cable function: 1. Observe the precautions in “Before You Begin” on page 29. 2. -
Page 48: Connecting To The Internal Headers
Connecting to the Internal Headers Before connecting cables to any of the internal headers, observe the precautions in “Before You Begin” on page 29. Figure 27 shows the location of the internal headers and connectors on Intel Desktop Board DP55WG. Figure 27. Internal Headers... -
Page 49: S/Pdif Header
Key (no pin) +5 VDC Front Panel Intel HD Audio Header Figure 27, B shows the location of the front panel Intel HD Audio header. Table 5 shows the pin assignments and signal names for the front panel Intel HD Audio header. -
Page 50: Front Panel Header
Intel Desktop Board DP55WG Product Guide Table 6 shows the pin assignments and signal names for the front panel CIR receiver (input) header and Table 7 shows the pin assignments and signal names for the back panel CIR emitter (output) header. -
Page 51: Alternate Front Panel Power Led Header
Installing and Replacing Desktop Board Components Alternate Front Panel Power LED Header Figure 27, F shows the location of the alternate front panel power LED header. Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. If your chassis has a three-pin power LED cable, connect it to this header. -
Page 52: Ieee 1394A Header
Intel Desktop Board DP55WG Product Guide IEEE 1394a Header Figure 27, H shows the location of the IEEE 1394a header. Table 11 shows the pin assignments and signal names for the IEEE 1394a header. Table 11. IEEE 1394a Header Signal Names... -
Page 53: Connecting To The Audio System
Installing and Replacing Desktop Board Components Connecting to the Audio System ® After installing the Realtek audio driver from the Intel Express Installer DVD-ROM, the multi-channel audio feature can be enabled. Figure 28 shows the back panel audio connectors. The connector assignments are shown in the table. -
Page 54: Connecting Chassis Fan And Power Supply Cables
Intel Desktop Board DP55WG Product Guide Connecting Chassis Fan and Power Supply Cables Connecting Chassis Fan Cables Connect chassis fan cables to the chassis fan headers on the Desktop Board. Figure 29 shows the location of the chassis fan headers. -
Page 55: Connecting Power Supply Cables
Installing and Replacing Desktop Board Components Connecting Power Supply Cables Figure 30 shows the location of the power connectors. CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V power connector (Figure 30, A) to the Desktop Board may result in damage to the board or the system may not function properly. -
Page 56: Setting The Bios Configuration Jumper
Intel Desktop Board DP55WG Product Guide 1. Observe the precautions in "Before You Begin" on page 29. 2. Connect the 12 V processor core voltage power supply cable to the 2 x 4 pin connector (Figure 30, A) . 3. Connect the main power supply cable to the 2 x 12 pin connector (Figure 30, C). -
Page 57: Clearing Passwords
Installing and Replacing Desktop Board Components Table 13. Jumper Settings for the BIOS Setup Program Modes Jumper Setting Mode Description Normal (default) (1-2) The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. -
Page 58: Replacing The Battery
Intel Desktop Board DP55WG Product Guide 8. Use the arrow keys to select Clear Passwords. Press <Enter> and Setup displays a pop-up screen requesting that you confirm clearing the password. Select Yes and press <Enter>. Setup displays the maintenance menu again. - Page 59 Installing and Replacing Desktop Board Components OBS! Det kan oppstå eksplosjonsfare hvis batteriet skiftes ut med feil type. Brukte batterier bør kastes i henhold til gjeldende miljølovgivning. VIKTIGT! Risk för explosion om batteriet ersätts med felaktig batterityp. Batterier ska kasseras enligt de lokala miljövårdsbestämmelserna.
- Page 60 Intel Desktop Board DP55WG Product Guide AŚCIAROŽZNAŚĆ Існуе рызыка выбуху, калі заменены акумулятар неправільнага тыпу. Акумулятары павінны, па магчымасці, перепрацоўвацца. Пазбаўляцца ад старых акумулятараў патрэбна згодна з мясцовым заканадаўствам па экалогіі. UPOZORNÌNÍ V případě výměny baterie za nesprávný druh může dojít k výbuchu. Je-li to možné, baterie by měly být recyklovány.
- Page 61 Installing and Replacing Desktop Board Components ВНИМАНИЕ При использовании батареи несоответствующего типа существует риск ее взрыва. Батареи должны быть утилизированы по возможности. Утилизация батарей должна проводится по правилам, соответствующим местным требованиям. UPOZORNENIE Ak batériu vymeníte za nesprávny typ, hrozí nebezpečenstvo jej výbuchu. Batérie by sa mali podľa možnosti vždy recyklovať.
- Page 62 Intel Desktop Board DP55WG Product Guide...
- Page 63 Installing and Replacing Desktop Board Components To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 29). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter). 3.
- Page 64 Intel Desktop Board DP55WG Product Guide...
-
Page 65: Updating The Bios
Power-On Self-Test (POST) memory test begins and before the operating system boot begins. This chapter tells you how to update the BIOS by either using the Intel Express BIOS Update utility or the Iflash Memory Update utility, and how to recover the BIOS if an update fails. -
Page 66: Updating The Bios With The Iso Image Bios Update File Or The Iflash Memory Update Utility
Intel Flash Memory Update Utility You can obtain either of these files through your computer supplier or by navigating to the Intel Desktop Board DP55WG page on the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop Navigate to the DP55WG page, click “[view] Latest BIOS updates,” and select the ISO Image BIOS Update or Iflash BIOS Update utility file. -
Page 67: Updating The Bios With The Iflash Memory Update Utility
CD-ROM, bootable USB flash drive, or other bootable USB media. The utility available on the Intel World Wide Web site provides a simple method for creating a bootable CD-ROM that will automatically update your BIOS. The Iflash BIOS update files can also be extracted locally to your hard drive and copied to a bootable USB flash drive or other bootable USB media. -
Page 68: Recovering The Bios
BIOS could be damaged. Due to BIOS size and recovery requirements, a CD-R with the .BIO file in the root directory will be required. Related Links: For more information about updating the Intel Desktop Board BIOS or recovering from a BIOS update failure, go to http://support.intel.com/support/motherboards/desktop/sb/CS-022312.htm... -
Page 69: Configuring For Raid Using Intel Matrix Storage Technology
4. Then save your settings by pressing <F10>. Creating Your RAID Set 1. Upon re-boot, you will see the following Intel Matrix Storage Manager option ROM status message on the screen: Press <Ctrl-I> to enter the RAID Configuration Utility. Press <Ctrl-I> and enter the RAID Configuration Utility. -
Page 70: Loading The Intel Matrix Storage Technology Raid Drivers And Software (Required For Microsoft Windows Xp Installation)
SATA RAID Controller driver. 3. Finish the Windows installation and install all necessary drivers. 4. Install the Intel Matrix Storage Console software via the Intel Express Installer CD included with your Desktop Board or after downloading it from the Internet at http://support.intel.com/support/motherboards/desktop/. -
Page 71: A Error Messages And Indicators
A Error Messages and Indicators Intel Desktop Board DP55WG reports POST errors in two ways: • By sounding a beep code and blinking the front panel power LED • By displaying an error message on the monitor • By displaying diagnostic progress codes (POST codes) BIOS Error Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s... -
Page 72: Bios Error Messages
Intel Desktop Board DP55WG Product Guide BIOS Error Messages When a recoverable error occurs during the POST, the BIOS displays an error message describing the problem. Table 16 gives an explanation of the BIOS error messages. Table 16. BIOS Error Messages... -
Page 73: Port 80H Post Codes
Error Messages and Indicators Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h and displayed on the Desktop Board’s seven-segment LED display shown in Figure 33. -
Page 74: Port 80H Post Codes
Intel Desktop Board DP55WG Product Guide Table 17 lists the Port 80h POST codes in hexadecimal notation. Table 17. Port 80h POST Codes POST Code Description ACPI S States Entering S0 state, standard 01-05 Entering S1-S5 state 10, 20, 30,... - Page 75 Error Messages and Indicators POST Code Description CPU Initialization (PEI, DXE, SMM) 41-43 Begin to end CPU PEI init 44-46 Begin to end CPU SMM init/relocate bases 47-4C CPU DXE phase begin to end 4D-4F CPU DXE SMM phase begin to end I/O Buses 50-52 PCI enumeration, allocation, hot plug...
- Page 76 Intel Desktop Board DP55WG Product Guide...
-
Page 77: B Regulatory Compliance
• Electromagnetic Compatibility (EMC) regulations • Product certifications Safety Standards Intel Desktop Board DP55WG complies with the safety standards stated in Table 18 when correctly installed in a compatible host system. Table 18. Safety Standards Regulation Title CSA/UL 60950-1, First Information Technology Equipment –... -
Page 78: European Union Declaration Of Conformity Statement
Intel Desktop Board DP55WG Product Guide European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel ® Desktop Board DP55WG is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directives 2004/108/EC (EMC Directive) and 2006/95/EC (Low Voltage Directive). -
Page 79: Product Ecology Statements
The following information is provided to address worldwide product ecology concerns and regulations. Recycling Considerations As part of its commitment to environmental responsibility, Intel has implemented the Intel Product Recycling Program to allow retail consumers of Intel’s branded products ®... - Page 80 Français Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis en œuvre le programme Intel Product Recycling Program (Programme de recyclage des produits Intel) pour permettre aux consommateurs de produits Intel de recycler les produits usés en les retournant à...
- Page 81 Regulatory Compliance Portuguese Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o Programa de Reciclagem de Produtos para que os consumidores finais possam enviar produtos Intel usados para locais selecionados, onde esses produtos são reciclados de maneira adequada.
-
Page 82: Lead-Free 2Li/Pb-Free 2Li Board
FLI is acceptable because of the RoHS "flip chip" or "die bump" interconnect exemption. Intel Desktop Board DP55WG is a lead-free second level interconnect product. Table 19 shows the lead-free second level interconnect marks as they appear on the board and accompanying collateral. These marks are based on JEDEC standard J-STD-609, “Marking and Labeling of Components, PCBs and PCBAs to Identify Lead,... -
Page 83: Restriction Of Hazardous Substances (Rohs)
Polybrominated biphenyls (PBB) • Polybrominated diphenyl ether (PBDE) The maximum concentrations allowed are 0.1% or 1000 ppm (except for cadmium, which is limited to 0.01% or 100 ppm) by weight of homogeneous material. Intel Desktop Board DP55WG complies with these restrictions. -
Page 84: China Rohs
The EFUP for Intel Desktop Boards has been determined to be 10 years. The EFUP for Intel Desktop Board DP55WG is shown in Table 20. Table 20. China RoHS Environmentally Friendly Use Period Mark... -
Page 85: Intel Desktop Board Dp55Wg China Rohs Material Self Declaration Table
Regulatory Compliance The China MII stipulates that a material Self Declaration Table (SDT) must be included in a product’s user documentation. The SDT for Intel Desktop Board DP55WG is shown in Figure 34. Figure 34. Intel Desktop Board DP55WG China RoHS Material... -
Page 86: Emc Regulations
Intel Desktop Board DP55WG Product Guide EMC Regulations Intel Desktop Board DP55WG complies with the EMC regulations stated in Table 21 when correctly installed in a compatible host system. Table 21. EMC Regulations Regulation (Class B) Title FCC 47 CFR Part 15,... -
Page 87: Ensure Electromagnetic Compatibility (Emc) Compliance
Regulatory Compliance Korean Class B statement translation: This is household equipment that is certified to comply with EMC requirements. You may use this equipment in residential environments and other non-residential environments. Ensure Electromagnetic Compatibility (EMC) Compliance Before computer integration, make sure that the power supply and other modules or peripherals, as applicable, have passed Class B EMC testing and are marked accordingly. -
Page 88: Product Certifications
Intel Desktop Board DP55WG Product Guide Product Certifications Board-Level Certification Markings Intel Desktop Board DP55WG has the product certification markings shown in Table 22. Table 22. Product Certification Markings Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. -
Page 89: Chassis And Component Certifications
Regulatory Compliance Chassis and Component Certifications Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring, and cables; are components certified for the country or market where used. Agency certification marks on the product are proof of certification. Typical product certifications include: In Europe The CE marking signifies compliance with all applicable European requirements. - Page 90 Intel Desktop Board DP55WG Product Guide...