Emerson EWC19T3, EWC27T3 Owner's Manual page 33

5
Set beginning hour
Press the Arrow button K or L until
the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the Arrow button B.
6
Set beginning minute
Press the Arrow button K or L until
the desired minute appears.
(Example: "30" for 7:30PM)
Then, press the Arrow button B.
7
Set end hour
Press the Arrow button K or L until
the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the Arrow button B.
8
Set end minute
Press the Arrow button K or L
until the desired minute appears.
(Example: "50" for 8:50PM)
Then, press the Arrow button B.
9
Set the tape speed
Press the Arrow button K or L
until the desired tape speed
appears. (Example: SP)
10
Finish setting the program
Press the ENTER or RETURN button. The program
is now completed.
•
To set another program, repeat steps [2] to [10].
•
Press the SETUP button on the remote control to
return to original mode.
11
Set the timer
Press the POWER button to set automatic timer
recording. The RECORDING indicator lights up.
•
You must turn off the TV/DVD/VCR to activate
automatic timer recording.
If power is not turned off and you continue watch-
ing TV, "TIMER REC STANDBY" starts flashing
on the TV screen 2 minutes before the programmed
start time.
TIMER PROGRAM EXTENSION
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P
B 61 7/04 FRI 7:12 -:- - - -
M
To shift the time schedule of an automatic timer
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
recording.
- - -/- - - - - -:- - -:- - - -
1)Press the POWER button.
2)Repeat step [1] on page 32.
– TIMER PROGRAMMING –
CH DATE BEGIN END
3)Press the RECORD button and select the desired
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
program using the Arrow button K or L.
- - -/- - - - - -:- - -:- - - -
P
B 61 7/04 FRI 7:30 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
4)Press the RECORD button again.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
the recording is already in progress, each additional
– TIMER PROGRAMMING –
push will shift forward the end time only. If you
CH DATE BEGIN END
want to cancel while setting, press the PAUSE but-
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
ton on the remote control. The recording time
P P
B 61 7/04 FRI 7:30 8:30 - -
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - returns to the original time.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
NOTE: When you shift forward the time schedule
during recording, the recording speed will automati-
cally be set to the SLP mode.
– TIMER PROGRAMMING –
CH DATE BEGIN END
5)Press the ENTER or RETURN button to exit the
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
setting menu. Then press the SETUP button on the
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/04 FRI 7:30 8:50 - -
M M
- - -/- - - - - -:- - -:- - - -
remote control to return to original mode.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
TO CORRECT A PROGRAM
•
While setting a program; press the Arrow button
– TIMER PROGRAMMING –
s to go back one step and enter the correct num-
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
bers using the Arrow button K or L.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/04 FRI 7:30 8:50 SP
M M •
After setting a program;
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
1)Press the POWER button.
- - -/- - - - - -:- - -:- - - -
2)Repeat steps [1] - [2] on page 32.
3)Press the Arrow button B (or press the Arrow
4)Press the POWER button to set automatic timer
TO CANCEL AN AUTOMATIC TIMER
RECORDING
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 32 and select a
3)Press the C.RESET button.
4)Press the SETUP button on the remote control to
•
While recording is in progress;
1)Press the POWER button.
2)Press the STOP/EJECT button on the
- 33 -
button s to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the Arrow button K or L.
recording.
program you want to cancel.
return to TV mode.
TV/DVD/VCR.
TV/VCR
EN
1C29